Software

Power Management and Shutdown Software
Our UPS products can be connected to a variety of power management and system shutdown software. This software is important, as it monitors the state of the UPS and shuts down the computer gracefully if necessary. The UPSMON and UPSilon software below is designed for use with Always n™ UPS systems only.

UPSMON Plus
UPSmon Plus prevents your computer from crashing during a power failure. If the UPS's battery runs low, in the case of power failure, UPSmon Plus will detect this and perform and orderly shutdown of your computer before the battery runs out. Uses the 9-pin RS232 cable supplied with your UPS or the optional USB kit and runs on Microsoft Windows 95/98/NT/2000, Novell NetWare, and Linux.

UPSMON Plus 2.72 Limousin with USB [7.5Mb]
UPSMON Plus 2.72 V Series with USB [7.5Mb]
UPSMON Plus 2.72 L/N Series with USB [7.5Mb]

UPSMON Plus 2.72 [7.5Mb]
UPSMON Plus 2.63 [5.3Mb]
UPSMON for Linux [25.1Kb] see README file
UPSMON for Novell V1.0 [234.1Kb]
UPSMON for Netware [174.8Kb]

UPSilon 2000
UPSilon 2000 lets you monitor local UPS's, as well as remote units, by TCP/IP from your central location. UPSilon 2000 can be configured to automatically send e-mails when an event occurs, such as a power outage. It can also call a pager, when an event occurs, with the use of a modem. The display is a real time display of the graphical display of UPS status, including input/output voltage, frequency, load, temperature and capacity. UPSilon 2000 will shut down the system in a safe fasion before the batteries run out.

UPSilon 2000 Windows 95/98/NT/2000 [74Mb ISO]
UPSilon 2000 Windows 95/98/NT/2000 [72Mb ZIP]
UPSilon for UNIX [399Kb]